Vacuum pump
|
|
|
|
| Concrete equipments Tratament prin vacuumare | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Description
The Tremix Vacuum System is a method for laying high-quality concrete floors at an acceptable cost. The key of the method is dewatering concrete by the vacuum process. Through vacuum dewatering, the surplus water is removed from the concrete, which means that the water/cement ratio automatically leads to a noticeable improvement of almost each of the concrete properties. These improvements are particularly noticeable on the top surface i.e. the most vital part of a floor. Immediately after vacuum dewatering the flatness of the concrete surface is checked and adjusted with a control tool, and the finishing operation with a power-trowel can start. The Tremix equipment for dewatering of concrete by the vacuum process consists of a vacuum pump P 4001,a top cover and filter pads. The top cover is made of special reinforced, airtight plastic sheet, with a suction channel on the bottom side. It is provided with two lifting tubes which makes it easier to unroll the top cover to therequired length. The filter pad is made of perforated plastic sheet with distance cushions on thetop side. It acts as a filter between the fresh concrete and the top cover.
TOP COVER
FILTER PAD
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||